Derailleurs

Shimano's CX70 Front Derailleur was designed from the ground up for the uiquely punishing world of cyclocross. Mud-shedding plates fight back against ice and debris build up. Reinforced pins stiffen the plates for fast shifts under the worst conditions, while special attention has been paid to the derailleur pivots and arms so they shed mud and ice. The cage size is optimized for the close-ratio chainrings common on cyclocross bikes. The CX70 Front Derailleur is available as either a top or bottom pull model to suit your bike.

Despite its smaller, lighter design, the Shimano Dura-Ace FD-R9250 offers ultra-fast front shifting. - Fast Di2 shifting performance - Smaller, sleeker, lighter - Frontal area is smaller than previous designs to reduce aerodynamic drag - Top gear teeth capacity: 50-55t - 61-66 degree chainstay angle - Includes 1 SD300 port

- Model Number: RD-R3000-GS - Series: SORA - Maximum Sprocket: 34T - Minimum Sprocket: 11T - Maximum Front Difference: 20T - Total Capacity: 43T

- Model Number: FD-R3030 - Series: SORA - Top Gear Teeth: 50T - Chain Stay Angle: 63-66 - Chain Line: 45 - Models: Braze-on and band clamp available - Band clamp model includes shims for 31.8/28.6mm seat tubes

Combining Shimano's Di2 platform and the road incarnation of Hyperglide+, the Ultegra FD-R8150 front derailleur shifts between chainrings with the fast and seamless action. - Small, sleek and lightweight front derailleur - Frontal area is smaller than previous designs to reduce aerodynamic drag - Top gear teeth capacity: 50-54t - 61-66 degree chainstay angle - Includes 1 SD300 port

Shimano Ultegra R8050 Di2 front derailleur. - Quick and smooth front shifting under high pedaling torque - Programmed control of chain guide - Shimano Synchronized shift - Full and semi synchronized shifting program - Redesigned to fit wider gear pitch without sacrificing shifting - Shorter length of rear center (410mm) with O.L.D. 135mm - System communication with rear derailleur, Programmed control of chainguide works for minimal chance of chain drop - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 132 grams

Ultegra RX brings Shimano's pioneering chain stabilizing technology to road cycling, delivering smooth and precise shifting over technical terrain. It expands road bike capabilities, inspiring confidence on any surface and drives the evolution of road cycling to include greater elements of adventure. No longer is the road bike narrowly defined. Shimano Ultegra RX broadens the notion of drop bar riding and emboldens cyclist to explore further. - Chain Stabilizer mechanism adopted from MTB design - Stabilizer ON/OFF switch - Compatible with current road dual control lever - Shadow RD technology - Direct mount compatible - Maximum cog size: 34t - Total capacity: 39t

The Campagnolo EKAR Rear Derailleur is designed for the 1x13-speed EKARndrivetrain with a gravel-orientated performance & build. - 2D parallelogram trajectory offers precise mechanical movement for 13 sprockets - High grade polymer pulley wheels (12T upper, 14T lower) allow for smooth chain running and secure retention - Carbon fiber-reinforced polyamide and anodized 7075 and 6082 alloys are lightweight, strong, and durable - Stainless steel bolts for strength and long-term resilience on gravel - Includes clutch lock for easy wheel removal Specifications: - Largest Cog: 44 - Rear Derailleur Mount Type: 10x1 Standard - Chain Wrap Capacity (teeth): 34 - Cage Length: Medium - Rear Der/Shifter Compatibility: Campy EKAR - Drivetrain Speeds: 13 - Weight: 275g

The Super Record 12-Speed rear derailleur combines the highest quality materials for exceptional weight and unparalleled performance. The unidirectional carbon fiber front rocker arm reduces weight, with an innovative shape that envelopes the cassette better, thanks to 3D Embrace technology, creating a double effect: allowing the chain to maintain optimum traction at all times, thus increasing the speed, power and precision of shifting. - Carbon fiber-reinforced construction, to increase strength while keeping weight to a minimum - Optimized spring return for constant chain tension - Adjustment of the initial rear derailleur position - Removable pivot on the upper body - Optimized to work with cassettes from 11 to 34 teeth Specifications: - Largest Cog: 34 - Rear Derailleur Mount Type: 10x1 Standard - Chain Wrap Capacity (teeth): 37 - Cage Length: Medium - Rear Der/Shifter Compatibility: Campy 12-Speed Chorus/Record/Super Record 2019+ - Drivetrain Speeds: 12

- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes

- Upper pulley has larger teeth for increased chain control

The Shimano FD-R7000 11-speed front derailleur offers lighter front shifting with a natural stroke feel. The derailleur's cage design is optimized to perform with disc brake road bikes, while multiple cable routing options and integrated cable tension adjustment allow for precise setup and easy adjustments. As part of Shimano's 105 R7000 series, this front derailleur is ideal for beginner road cyclists, combining great value with trickle-down technology from Shimano's top-tier groups. - Cage is optimized for disc brake road bikes - Integrated cable tension adjustment for precise and easy adjustments - More frame cable routing options

Shimano's 105 Rear Derailleur delivers high-end function with upscale looks. With a body of light, durable cold-forged aluminum in Shimano's wide-pivot design with their light-action spring, rear shifting is practically effortless and always super smooth. The top pulley stays a uniform distance from each cassette cog ensuring that every shift resonates with the plunk of exact gear engagement.

Shimano Acera RD-M3020 Rear Derailleur - Speed: 7/8 - Cage: SGS - RD Spring TypeTop Normal - Maximum Cog: 40T - Minimum Cog: 11T - RD Capacity: 45T

Shimano's Acera rear derailleur makes use of advanced designs that make it shift better and last longer. HyperGlide technology results in faster shifting, and Double Servo technology utilizes a double servo-panta mechanism that enables the rear derailleur to track perfectly to each shift and maintain an optimum distance from each sprocket. - Maximum cog size: 34t - Total capacity: 45t - Pulleys: 11t - Chain compatibility: HG 9-speed

Shimano Side Swing front derailleurs feature improved cable routing for smooth and efficient front shifting effort and increased clearance for larger tires and shorter chainstays. - Optimal front system for internal cable routing - Enhanced maneuverability with plus-sized tires - Increased shifting efficiency and light and smooth operation force

- 7/8 speed design - Steel inner and outer links with steel chain cage - Multi-clamp to fit 28.6 – 34.9mm frames - Multi-pull design - Total gear teeth: 48 - For seattube angles between 63 - 66 degrees

- 7/8 speed design - Steel inner and outer links with steel chain cage - Multi-clamp to fit 28.6 – 34.9mm frames - Multi-pull design - Total gear teeth: 48 - For seattube angles between 66 - 69 degrees

Altus wide link 7/8-speed compatible dual-pull multi-fit front derailleur for recreational off-road use. - Compact conventional swing design - Low-friction wide linkage reduces shifting effort and increases rigidity - Dual-pull design allows it to be used with top or bottom cable routing - Multi clamp band is compatible with all frame dimensions - 66-69 degree chainstay to seat tube angle range - For outer chainring size from 42 to 48 tooth, total capacity 20 teeth - Compatible with 7- or 8-speed drivetrains

Shimano FD-M2000 front derailleurs feature Mega Lite and HyperGlide technologies for smooth and easy operation. They're a perfect replacement for your 3 x 9 drivetrain.

The Shimano Altus rear derailleur brings Shadow technology and wide-range capability to 9-speed drivetrains - B tension spring for quick and easy wheel installation and removal - Super low-profile concept with SHADOW mechanism - Wider linkage ensures durability and more precise shifting - Easy adjustment and maintenance - Direct mount compatible - Maximum cog size: 36t - Total capacity: 45t

Claris R2000 series offers reliable functionality at a price point for new riders. Designed for easy rides around town with the durability to handle a long tour, Claris R2000 has a sporty design and promises the opportunity of comfortable and casual riding.

Claris R2000 series offers reliable functionality at a price point for new riders. Designed for easy rides around town with the durability to handle a long tour, Claris R2000 has a sporty design and promises the opportunity of comfortable and casual riding.

Shimano's Claris rear derailleur is a perfect replacement part or upgrade for 8-speed road drivetrains. HyperGlide technology results in smoother, faster shifting. - Maximum cog size: 32t (SS) / 34t (GS) - Total capacity: 37t (SS) / 43t (GS) - Pulleys: 11t - Chain compatibility: HG 8-speed

Features: - Smooth shifting and less cadence shock - Close step (10T) - SIDE SWING construction - Efficient cable routing - OPTISLICK cable - Stable performance on suspension bikes - Shifts properly while rear suspension handles rough trails and obstacles - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - 2x10-speed

Features: - Smooth shifting and less cadence shock - Close step (10T) - Efficient cable routing - OPTISLICK cable - Stable performance on suspension bikes - Shifts properly while rear suspension handles rough trails and obstacles - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - 2x10-speed

- SHADOW low profile design - Min cog size : 11T - Max cog size : 34T - Max front difference : 22T - Capacity : 45T

• Wider clearance for large wheels • Compatible with shorter chain stays • Efficient cable routing for light shift operation • Increased traction range for long-travel and active rear suspension • Model Number : FD-M8020 • Series : DEORE XT • Swing Action : Side Swing • Cassette Compatibility : 11 • Maximum Capacity : Total capacity 10T • Top Gear Teeth : 34-38T • Cable Routing : Front-Pull • Chain Line : 48.8 • Chain Stay Angle : 66-69

• Wider clearance for large wheels • Compatible with shorter chain stays • Efficient cable routing for light shift operation • Increased traction range for long-travel and active rear suspension • Model Number : FD-M8020 • Series : DEORE XT • Swing Action : Side Swing • Cassette Compatibility : 11 • Maximum Capacity : Total capacity 10T • Top Gear Teeth : 34-38T • Cable Routing : Front-Pull • Chain Line : 48.8 • Chain Stay Angle : 66-69 • BB Mounting Plate : E-Type

• 11-speed DynaSys compatible • Light Shift Operation With 20% Less Effort • Improved chain stability • Efficient Shifting And Smoother Driving • New Shadow Design With Optimized Slant Angle • New Shift Cable With New Hyper Low-Friction Coating Technology • New Shadow Design With Optimized Slant Angle For Stable Gear Position • Easy-To-Adjust Chain Stabilizer • Efficient Pulley Teeth Design • Direct Mount compatible