Chainrings

104 BCD is the most common bolt pattern on double and triple cranksets and happens to be the first product ever made by Wolf Tooth Components. This chainring started it all for us. The Drop-Stop tooth design is the best performing and longest lasting wide/narrow chainrings on the market. - Fits any 104 BCD crankset. - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment.

The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet. They are available in 3 different offsets: 6mm offset for 49mm chainline, 3mm offset for 52mm chainline, and 0mm offset for 55mm chainline and SRAM Transmission optimization. They are available in various tooth profiles to suit your drivetrain, including Drop-Stop B, which is optimized for SRAM T-Type Transmission and compatible with many other chains. Crankset and chainring compatibility questions? Check out our helpful guide here.

These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that these chainrings are NOT compatible with SRAM 8-bolt direct mount cranksets

Also compatible with Cane Creek eeWings cranksets

Wolf Tooth's patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud shedding ability

Boost: 0mm offset for 55mm chainline required for SRAM Transmission

Boost: 3mm offset for 52mm chainline or Transmission compatibility with Super Boost bikes

BB30: 0mm offset for BB30 short spindle cranks for 49mm chainline

Standard MTB: 6mm offset for non-Boost mountain bikes, GXP and long spindle BB30 cranks for 49mm chainline

Fat bikes: If your fat bike has a 170/177 rear hub spacing, use the standard 6mm offset

Praxis Works Road/CX cranks use the 6mm offset. Praxis Works mountain cranks use the 3mm offset for their DM-A and 0mm offset for their DM-B cranksets

Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on-road applications with the giant 50t rings.

Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.

Fits 110 BCD 5 arm cranksets

Alternating wide/narrow tooth pattern prevents chain derailment

These rings are for use with 110 BCD 5-arm cranksets

Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting

Chainline varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring)

Recommend the use of a clutch-style rear derailleur for the best chain security

If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck

Weight: 34t/44g, 36t/58g, 38t/66g, 40t/74g, 42t/81g, 44t/90g, 46t/107g, 48t/115g, 50t/125g

Material: 7075-T6 aluminum

Made in the USA

These chainrings are for Shimano direct mount cranks. The Wolf Tooth chainrings feature our patented Drop-Stop design for the best wear life, chain retention, and mud clearance.

Shimano XTR M9100, XT M8100, SLX M7100, and Deore M6100 series 12 speed cranksets

Our chainring offset matches the offset of Shimano chainrings to replicate the intended chainline for the crankset

Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A

Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only

Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain

If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck

Wolf Tooth Direct Mount Chainrings for Trek TQ E-Bike Motors are compatible with all Boost and Super Boost bikes that use the Trek TQ Motor. This brings a lightweight chainring with patented Drop-Stop® technology to e-bike chainrings for the first time. Direct Mount Chainrings for Trek TQ E-Bike Motors are machined with 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. Compatibility: - Chainring is compatible with only TQ Motor drive systems - 55 mm chainline - Available in two different tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, SRAM Flattop Road or Transmission (T-Type), KMC, Connex or Wippermann chains. DROP-STOP B - Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC - Not compatible with 12s Shimano HG+ chains DROP-STOP ST - Compatible with 12s Shimano Hyperglide+ chain and 12s KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Tech Specs: - Weights: 30t/64g | 32t/69g - Material: 7075-T6 aluminum - Made in the USA

Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our patent pending Drop-Stop® technology. These beautifully machined 110 BCD asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX / road / gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. - Fits 110 BCD Asymmetric 4-bolt Shimano cranks - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - Fits 110 BCD asymmetric 4-bolt cranks - All sizes compatible with Dura Ace 9000, Ultegra 6800, 105 5800, RS510, Tiagra 4700 or 4703, Sora R3000 or R3030, and Claris R2000 or R2030 cranks. - 38-50t are compatible with 105 R7000, Ultegra R8000, and Dura-Ace R9100. The 36t chainring is NOT compatible with these cranks. - NOT compatible with Dura-Ace R9200, Ultegra R8100, and 105 R7100 Cranks - Size 42t and larger will work with the Dura Ace 9100 power meter - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need our 6mm bolts which are optimized for single ring mounting. - If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention - Chainline 47.5mm - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains

These chainrings are for Shimano GRX cranks. They feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Drop-Stop ST is specifically for the Shimano 12-speed Hyperglide+ chain, which is used by GRX 12-speed. Drop Stop-B works with all other 9, 10, 11, and 12-spd chains, including SRAM Flattop. Compatibility: - Shimano GRX cranksets including RX600 and RX810 - Drop-Stop ST is designed for Shimano 12-speed Hyperglide+ chains - Drop-Stop B tooth profile is compatible with SRAM Flattop chain - Wolf Tooth’s patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud-shedding ability - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains

Wolf Tooth Direct Mount Chainrings for SRAM 8-bolt Cranks replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet. They feature our patented Drop-Stop design for the best wear life, chain retention, and mud clearance. Drop-Stop B is optimized for SRAM Eagle and Flattop chains.
Drop-Stop B tooth profile is compatible with all 9, 10, and 11-speed chains; 12-speed SRAM Eagle; 12-speed SRAM Transmission (T-type) Flattop; 12 and 13-speed SRAM Road; 12-speed Campy. Not compatible with 12-speed Shimano HG+ chains

- Designed for for Specialized 24/36T Crankset - Drivetrain Speeds: 2 x 10 - 104mm BCD

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains. - Medium Overshift Pin - 104mm BCD - Use with 22T

Replacement chainring for your eBike.

Get back on your bike with these replacement chainrings.

Features
- Compatible with Bosch Gen 3
- Without spider and bash guard
- For assembly on spider with mini ISIS axle interface

Shift smooth, use matching chainrings.

Prowheel: Crank it up!

Features
- Bosch Generation 3 specific e-bike narrow wide chainring
- Aluminum spider and steel chainring

Replacement chainring for your Bosch Gen 2 equipped bike

Get your bike back on the road with new chainrings

Features
- Bosch Generation 2 specific steel chain rings
- 3mm offset Boost compatible

Replacement chainrings for your Bosch Gen 4 equipped bike.

Features
- BCD 94mm
- Includes spider
- Compatible with Bosch Gen 4 drive units
- Prowheel: Crank it up!

Original Prowheel chainring.

Features
- Compatible with Prowheel crankset: TK01-42T-TT-1
- Chainline: 49.6mm
- With Narrow/Wide teeth
- With plastic chainguard

Get back on your bike with these replacement chainrings.

Features
- Compatible with Bosch Gen 4
- With spider and bash guard

Original replacement chainring for your bike.

Features
- Compatible with Bosch Gen 3
- Includes spider, bolts and nuts
- Compatible with mini ISIS axle
- Compatible with 4-arm 104mm BCD cranks

• Replacement for one-piece crank • Steel

• One-piece • Steel • 1/8-inch chain compatible

• Fits one-piece cranksets • Steel construction • 44T • 3/32"

• Triple-chainring replacement for one-piece crank • Durable steel construction • Chain guard • 48/38/28-teeth chainrings

• Replacement for one-piece crank • Steel • Double chain guard • 3/32-inch

Shimano Dura-Ace FC-R9200 chainrings are constructed with high-quality aluminum and are compatible with FC-R9200 and FC-9200-P 2x 12-speed cranksets. - Asymmetric 110 BCD - Compatible with HG 12-speed chains - Aluminum with anodized finish provides durability and light weight - Hollowglide technology provides high rigidity and cuts down on weight while maintaining strength - Offers better power transfer and quicker, more precise front shifting - 50t outer chainring is for use with 34t inner chainring - 54t outer chainring is for use with 40t inner chainring

Rugged durability comes naturally to the stamped steel Eagle T-Type direct-mount chainring. With bash guard compatibility and availability in three different tooth counts, there is ample room to refine and customize your bike’s look and feel. Features - Silver chainrings available in 8-Bolt direct mount - Black chainrings available in 3-Bolt direct mount - Stamped Steel construction - 30-34tT range - +3mm offset - Compatible with T-Type chains - Bashguards compatibility shared with GX and X0 T-Type chainrings.

Rugged durability comes naturally to the stamped steel Eagle T-Type direct-mount chainring. With bash guard compatibility and availability in three different tooth counts, there is ample room to refine and customize your bike’s look and feel. Features - Silver chainrings available in 8-Bolt direct mount - Black chainrings available in 3-Bolt direct mount - Stamped Steel construction - 30-34tT range - +3mm offset - Compatible with T-Type chains - Bashguards compatibility shared with GX and X0 T-Type chainrings.

64BCD chainring for MTB cranksets

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chain - Material: Steel

The SRAM X-Sync STEEL 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-SYNC technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Drivetrain Speeds: 10 , 11 - Material: Steel - Ring Position/Type: Single - Weight: 110 grams (32t), 96 grams (30t),

The SRAM X-Sync Steel 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-Sync technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Compatibility: Compatible with all SRAM 1x cranks, DM 28-tooth ring is not compatible with 30mm cranks that require a 0mm offset ring