Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Tools

$8.53 - $22.50
T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. There is a special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.
- T-handle screwdriver for the transmission of high tightening and loosening moments
- Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for high power transmission and fatigue-free working
- "Take-it-easy" tool finder: color coding according to profile and size
- With additional short arm for the transmission of extremely high torques due to the leverage of the long arm
- With holding function (HF) securely holds the hexagon socket screw on the tool

$15.99
This 8mm pedal wrench is chrome plated for strength, has a dual compound handle for extra grip and comfort, and has an additional ball driver on the bottom of the handle for fast pedal installation and removal.

$9.95
Park's Bottom Bracket/Cassette Tool for Campagnolo is an indispensable tool for your Campagnolo drivetrain. It's for installing and removing all Record, Chorus, Centaur and Athena bottom brackets, and all Campagnolo cassette lockrings.

$18.95
Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)

$14.95
The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

$17.95
The Park FR-6 Freewheel Remover fits most 4-notch BMX and singlespeed freewheels. It can be held with a wrench or vise and its narrow profile allows use without removal of cones and locknuts.

$11.95
$14.99
20% Off
A must-have tool for any rider or mechanic who services hydraulic brakes. The PS-1 Pad Spreader features a tapered edge designed to drive apart and reset hydraulic bicycle brake pads that may have been accidentally engaged. The head of the PS-1 mimics a section of disc brake rotor, with strong stainless steel construction and a long, vinyl-dipped handle for leverage and comfort. The PS-1 can also be used as a temporary stand-in for the rotor when testing or servicing the hydraulic system, negating the need to repeatedly remove and install the wheel.
- Thickness: 1.95 mm
- Length: 162 mm (6.4")

$14.95 - $20.95
Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit.
- Carefully selected combination of Chrome Vanadium and S-2 tool steels
- Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless
- Sliding T-handle creates increased leverage and multiple access positions

$17.55
The Kool-Stop Tire Bead Jack is an articulated tool, with a comfortable grip, for installing really tight tires. The articulated end uses the rigid piece against the rim edge as a fulcrum while the hinged end lifts the bead up and over the opposite edge of the rim. This is a great tool for dealing with difficult tires.

$16.99
- Spider removal tool is compatible with all e*thirteen cranks that have a removable spider, and can also be used as an installation/removal tool for e*thirteen bottom brackets

$69.95
8-Bit System is a multi-function tool that regroups all potential needs in the field
-01 and -02 : 8-Bit Multi-tool plier offer 17 functions:
- Master link plier
- Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits
- Includes a tool for clearing tubeless valve stems and a spoke wrench
- Storage for one set of quick links
-03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on
- Chain breaker
- L key has a 3mm hex forked tire plug insert
- Utility knife
- Attach to 8-bit plier with magnets and short pins
- Items for internal storage are sold separately
-04 : 8-Bit Tire Lever + Rim Dent Remover add-on
- Tire lever
- Aluminum rim dent remover is designed for use with alloy rims
- Attach to 8-bit plier with magnets and short pins
-05 : Complete Kit Including Plier and both add-on

$139.95
8-Bit System is a multi-fonction tools that regroup all potential needs in the field
-01 and -02 : 8-Bit Multi-tool plier offer 17 functions:
- Master link plier
- Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits
- Includes a tool for clearing tubeless valve stems and a spoke wrench
- Storage for one set of quick links
-03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on
- Chain breaker
- L key has a 3mm hex forked tire plug insert
- Utility knife
- Attach to 8-bit plier with magnets and short pins
- Items for internal storage are sold separately
-04 : 8-Bit Tire Lever + Rim Dent Remover add-on
- Tire lever
- Aluminum rim dent remover is designed for use with alloy rims
- Attach to 8-bit plier with magnets and short pins
-05 : Complete Kit Including Plier and both add-on

$69.95
The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead.
- 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut
- Magnets keep all bits in place
- Ball detent swivel head helps access hard-to-reach places
- Handle doubles as breaker bar for extra torque when head is bent
- 8mm hex bit tested to over 40 Nm torque
- Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains)
- Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)

$119.95
In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter.
- 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx)
- Magnets & O-rings keep all parts in place
- Ball detent swivel head helps access hard-to-reach places
- Handle doubles as breaker bar when ball detent swivel head is bent for extra torque
- Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included)
- Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators)
- Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
- Chain & Tire Plug tool compatible with all bicycle chains including 12-speed
- Inserter tool and bacon strips plug holes in tubeless tires
- Five strips included; refills available
- Hardened steel pin for lifetime durability
- Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench
- Storage sleeves made of vibration-damping material and snug fit prevents rattling
- Durable precision-machined aluminum end caps
- Custom fit rubber flap can be trimmed to fit in smaller diameter bars
- Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately)
- Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars

$49.95
Fix tubeless tire punctures and broken chains. This multi-tool has a chain tool on one end and a tire plug built into the handle, with inner storage for tubeless tire plugs. The full multi-tool was designed for use with an EnCase System Storage Sleeve, which fits inside bar ends of your handlebars. Ride with this multi-tool in a storage sleeve or in a tool wrap for easy repairs while riding.
- Compatible with all bicycle chains, including 12-speed
- Inserter tool and bacon strips plug holes in tubeless tires
- Five bacon strip tire plugs included; refills available
- Hardened steel chain pin driver for lifetime durability
- Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) or carry in a jersey pocket
- Chain tool driver requires 4mm hex (available on EnCase System Hex Bit Wrench)
- Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)

$49.95
Make simple trailside or roadside repairs with this multi-tool that has 14 functions. An 8mm hex head has a 4mm insert to fit each of the eight attached hex bits. With its slim design, this multi-tool can be stowed inside an EnCase System Storage Sleeve to be carried in handlebar ends as it was designed, or a mainstay on any home workbench.
- 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx)
- Magnets & O-rings keep all parts in place
- Ball detent swivel head helps access hard-to-reach places
- Handle doubles as breaker bar when ball detent swivel head is bent for extra torque
- Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately)
- Magnet on bottom end of tool allows for storage on steel bike stands
- Fits all standard mountain handlebars and most drop bars (except being ergonomic drop bars that have hard angles in the drops)

$34.95
Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail.
- Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately)
- Vibration-damping material and snug fit prevents rattling
- Durable precision-machined aluminum end caps
- Custom fit rubber flap can be trimmed to fit in smaller diameter bars
- Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars
- Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)

$32.95
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool.
- Weight: 38.5g
- Size: 116 mm x 20 mm x 9 mm
- Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains
- Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
$144.95
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This new tool has included options for QR and thru axle. And for simple and durable storage, the components of this tool also nest inside of the handle.
- Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.
- Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.
- Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required.
- Works on 12mm thru axle and 5mm quick release bikes

$44.95
This ultralight hex and bottom bracket wrench has a 1-inch hex at one end and an external BB cup spline at the other end. The 1-inch hex end features magnets that quickly couple with Wolf Tooth's steel hex insert tools.
- 1-inch hex drive at one end and 16-notch 44mm bottom bracket tool (or centerlock rotor tool) at the other end
- Includes the wrench only. Steel inserts are not included but can be purchased separately
- 1-inch hex drive interface compatible. Magnets inset allow quick coupling and decoupling of steel inserts

$19.95 - $24.95
Flat wrench inserts from Wolf Tooth turn your flat wrench into many other tools.
- All inserts are 1 inch hex drive interface compatible
- Design and manufactured in Minneapolis, MN USA
- Nickel plated 4140 chromoly steel

$49.95
The Tool Wrap was designed to make trailside repairs quick and efficient. Featuring multiple flaps that allow you hang it from a wall, act as a changing area foot pad and more, the Tool Wrap is the perfect trailhead companion.
- Top flap that can be shut in a car door for a mobile workshop
- Bottom flap provides a work space to keep your parts and tools out of the dirt when working on the ground
- Pocket layout is ideal for all the tools you need to build a bike
- Aluminum eyelets for hanging up in your home or work shop
- Dimensions: 68 by 46 cm (main body), 60 by 20 cm top flap (for car door), 32 by 60 cm bottom flap (work space), rolled up diameter size varies

$9.50
Our 2437 open bore adapter is used to press 24x37 sealed bearings into bottom bracket cups, and direct fit frames like trek BB90. The adapter is machined with one step at 24mm ID, which fits into the center of the sealed bearing.
- Installs: 24x37 bearing
- Inner step outer diameter: 23. 8mm
- Outer diameter: 36. 8mm
- Thru hole diameter: 0. 387" (9. 8mm)
- Inner hole sized to fit 1/2" threaded rod
- Compatible with BP0006, BP0007
- Machined, red anodized aluminum
- Sold individually (2 drifts required for some installations)

$35.00
Sealed bearing extractor for 29mm ID bearings. Extractor has 1/2" thru hole for use with our 1/2" threaded rod press handles.
- This extractor is part of a system that requires additional pieces to function.

$9.50
Our 6806 open bore adapter is used to press 42x30 sealed bearings. The adapter is machined with one step at 30mm ID, which fits into the center of the sealed bearing. Common bearing size for BB30 frames and bottom brackets.
- Installs: 6806 bearing
- Inner step outer diameter: 29. 9mm
- Outer diameter: 41. 8mm
- Thickness: 7mm
- Thru hole diameter: 0. 387" (9. 8mm)
- Inner hole sized to fit 1/2" threaded rod
- Compatible BP0006, BP0007
- Machined, red anodized aluminum
- Sold individually (2 drifts required for some installations)

$47.25
BB30 service kit for SRAM DUB cranks.
- Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips
- Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm
- Enduro ABEC-3 bearings
- Use with SRAM DUB cranks
Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.

$18.50
Designed to press in all current wheels mfg bottom brackets! our universal bottom bracket frame
drift is designed to press all current wheels mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters listed in the compatibility tab below. Each step is laser etched with the diameter size. Drift can also can be used as a frame bottom bracket shell sizing guide!
- Inner hole sized to fit 1/2" threaded rod. (Not for use with our Press-1 or Press-4 )
- Compatible with any other press with a 1/2" diameter rod
- Recommended for use with Wheels Mfg BP0006, BP0007
- Machined aluminum
- Anodized red
- Sold individually
We do not recommend it for use with press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups or bearings from pressing in straight.

$57.50
An indispensable tool for the serious amateur bike mechanic or smaller bike shop, the Wheels Manufacturing Bearing Press is designed for installation of bottom brackets or sealed bearings with a minimum I.D. of 10mm. - Package includes 2 handles and a 3/8"-12 threaded rod - Economy Bearing Press, used with separately-purchased bearing adaptors

$9.50
Our GXP-LEFT open bore adapter is used to press 22x37 sealed bearings into SRAM GXP bottom bracket cups and direct fit frames like trek BB90. The adapter is machined with one step at 22mm OD, which fits into the center of the sealed bearing.
- Installs: 22x37 (GXP) bearing
- Inner step outer diameter: 21. 9mm
- Outer diameter: 36. 8mm
- Thickness: 7mm
- Thru hole diameter: 0. 387" (9. 8mm)
- Inner hole sized to fit 1/2" ACME threaded rod
- Compatible with BP0006, BP0007
- Machined, red anodized aluminum
- Sold individually

$52.50
- Headset drift for sealed bearing installation press - Drift is machined with steps to press in headset cups that use either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd-sized sealed bearings - Compatible with bearing presses using 1/2" diameter rod, such as Wheels Mfg Headset Cup Press (PRESS-8)
Page 1 of 15
Next page